Welcome, Guest. Please login or register.
May 15, 2024, 10:39:01 PM

Login with username, password and session length

Recent Topics

by Plap
[Today at 08:48:08 AM]

[May 14, 2024, 08:15:34 AM]

by jed
[May 14, 2024, 07:03:59 AM]

[May 13, 2024, 08:07:15 PM]

[May 12, 2024, 01:20:18 PM]

[May 11, 2024, 08:58:38 AM]

[May 09, 2024, 08:48:33 AM]

by jed
[May 08, 2024, 04:19:26 PM]

by jed
[May 08, 2024, 06:33:27 AM]

[May 07, 2024, 09:39:21 PM]

[May 07, 2024, 01:53:02 PM]

[May 05, 2024, 10:15:00 PM]

[May 02, 2024, 04:57:43 PM]

[April 30, 2024, 04:21:36 PM]

[April 30, 2024, 12:53:59 PM]

Picture Of The Month



BigFishy with a big springer!

Topic: DIY 6 Kayak Trailer with storage  (Read 2511 times)

0 Members and 1 Guest are viewing this topic.

HKLBRY

  • Krill
  • *
  • Location: Creswell, Or
  • Date Registered: Apr 2021
  • Posts: 12
DIY project.


HKLBRY

  • Krill
  • *
  • Location: Creswell, Or
  • Date Registered: Apr 2021
  • Posts: 12
Does anyone know how I can fix the pictures that keep loading side ways?  Or can Admin rotate them?  I have tried to rotate them on my phone and they still come out on their side.


Tinker

  • Sturgeon
  • *******
  • Kevin
  • Location: 42.74°N 124.5°W
  • Date Registered: May 2013
  • Posts: 3304
Mojo says to resize them slightly and that will correct it.
I expected the worst, but it was worse than I expected...


Captain Redbeard

  • Lauren
  • Global Moderator
  • Sturgeon
  • *****
  • Location: Portland, OR
  • Date Registered: May 2013
  • Posts: 3301
Cool trailer, can you tell us anything about it?


HKLBRY

  • Krill
  • *
  • Location: Creswell, Or
  • Date Registered: Apr 2021
  • Posts: 12
I Bought a used 6 1/2 x 8 light weight trailer off of Craigslist.  It had the wood floor and mess metal sides.  My design allows for the wooden framework to be removed and set on the ground as one piece, so that I can use the trailer as a utility trailer if needed.  But 99% of the time its sole purpose is as a kayak trailer.  My son has a flatbed trailer I can use anytime for the other duties.  I put new hub assemblies on the axle, new tires and wheels.  I had 36" added to the tongue length to allow for 90 degree turning in tight areas.  Framed with pressure treated 2x4's with extra bracing.  The cargo area is covered with 3/4 plywood that has about 4 coats of sealant and then I glued and screwed down the indoor/outdoor carpet. 


Captain Redbeard

  • Lauren
  • Global Moderator
  • Sturgeon
  • *****
  • Location: Portland, OR
  • Date Registered: May 2013
  • Posts: 3301
Cool - I didn't realize the upper was lumber. I'm assuming metal bracing on the crossbars? Just guessing based on the ability to hold that much weight. Bet you'll put a lot of kayak-miles on that thing!


HKLBRY

  • Krill
  • *
  • Location: Creswell, Or
  • Date Registered: Apr 2021
  • Posts: 12
The main supports are 2x4's.  I then measured how high I wanted each cross bar and cut 2x4's that are screwed to the main 2x4.  The cross bar then sits on top of that as it acts like a solid support.  I used 2 lag bolts and screws to mount the crossbars.  Then because my design is meant to be removed, I ran 2 2x4's length wise that also go under the upright for added weight capacity and movement.  What is no visible is the end uprights are sitting on top of a 4x6 box that puts the whole rack above the wheel wells.  If we have a single tag along the kayak will be centered on the top rack and if we hae 2 tag alongs the 2 lightest kayaks will be on the top.  The 2 smaller kayaks shown in the picture
are 50lbs.  I do have some metal brackets in a few key areas but they are no visible in the pics.  I will add support if I see any signs of concern.


HKLBRY

  • Krill
  • *
  • Location: Creswell, Or
  • Date Registered: Apr 2021
  • Posts: 12
I forgot to add the cargo box itself is framed with 2x10 which the upright are secured to.


Mojo Jojo

  • Sturgeon
  • *******
  • Suffers from Yakfishiolus Catchyitis
  • Location: Tillamook, Oregon
  • Date Registered: May 2014
  • Posts: 6016
Mojo says to resize them slightly and that will correct it.
Cell phone pics that load sideways, yup just crop it a hair and save it, works every time for me.



Shannon
2013 Jackson Big Tuna "Aircraft Carrier"
2011 Native Mariner Propel "My pickup truck"
2015 Native Slayer Propel "TLW's ride"
20?? Cobra Fish-N-Dive “10yo grandson’s”
20?? Emotion Sparky “5 yr old granddaughter’s”