Welcome, Guest. Please login or register.
June 16, 2021, 01:44:25 PM

Login with username, password and session length

Recent Topics

[Today at 01:34:23 PM]

[Today at 01:33:11 PM]

[Today at 12:35:31 PM]

[Today at 08:01:54 AM]

[Today at 07:28:24 AM]

[Today at 07:19:20 AM]

[June 15, 2021, 09:08:13 PM]

[June 15, 2021, 08:32:42 PM]

[June 15, 2021, 05:58:49 PM]

[June 15, 2021, 12:15:18 AM]

[June 14, 2021, 05:59:56 PM]

[June 14, 2021, 03:22:58 PM]

[June 14, 2021, 03:14:23 PM]

[June 14, 2021, 10:32:34 AM]

[June 14, 2021, 02:21:31 AM]

Picture Of The Month



Bent rods & dry socks.

Oregon Rockfish Classic 2021 Registration

2021 Oregon Rockfish Classic

sign up will close on July 3rd

When: July 10th, 2019
Where: Depoe Bay, OR

oregon-rockfish-classic-2021


SIGN UP LINK


Wicked Dan (msgdan) at Kayak Fishing Stuff.com made a nifty self-portrait camera mount and I said I was going to cobb together one of these in PVC. Well, I finally found one of those round tuits. Mine is made to fit in the Hobie mast hole, but it could easily be adapted to any rod mount.

The first one I made out of short lengths of 1" pvc, two couplers, an elbow and a tee. The idea was to make it stowable.







I added a 1/4" bolt to one of the end caps to mount the camera, then decided to screw the camera mount from a cheap mini tripod to the cap (made it waay more adjustable) It worked ok, but it had too many parts.



Then, in a momentary lapse into brilliance, it occurred to me to string them together with a bungee. That keeps all the parts together and makes it practically self assembling. So I did, it worked.



http://www.youtube.com/v/TOUKMUEn1ow&hl=en&fs=1"
 
I built another one in 1.25" pvc to make it a bit stiffer and I used the thinner pvc (sch 30?) to minimize weight. I found a small spider tripod and decided to leave it intact. Instead of screwing it to the cap I just shoved into the end of the pipe . Simpler and I can use it elsewhere.  $8 PVC and fittings+$8 mini tripod Total

Comments *

1) Re: Lo-budget Vanity Camera Mount
Written by Water Wolf QCI on April 24, 2009, 08:43:54 PM
Nice :) Looks like its not that tough to get it going :) I like this plan...Thanks FFTW
2) Re: Lo-budget Vanity Camera Mount
Written by bad lattitude on April 25, 2009, 06:37:20 PM
Genius.
3) Re: Lo-budget Vanity Camera Mount
Written by 0 on June 30, 2011, 11:10:53 PM
nice...clean and perfect!
4) Re: Lo-budget Vanity Camera Mount
Written by b0w_bender on February 27, 2021, 01:09:19 PM
I like it!
Commenting option has been turned off for this article.

anything