Welcome, Guest. Please login or register.
December 02, 2022, 02:37:11 PM

Login with username, password and session length

Recent Topics

[December 01, 2022, 08:18:42 PM]

[November 30, 2022, 11:53:56 AM]

[November 28, 2022, 07:04:40 PM]

[November 25, 2022, 04:52:28 PM]

[November 22, 2022, 11:28:43 PM]

[November 20, 2022, 04:22:14 PM]

[November 18, 2022, 03:17:31 PM]

[November 17, 2022, 08:35:55 PM]

[November 17, 2022, 08:28:44 PM]

by [WR]
[November 16, 2022, 06:44:38 PM]

[November 15, 2022, 07:04:00 AM]

[November 14, 2022, 05:19:52 PM]

[November 14, 2022, 06:18:29 AM]

[November 11, 2022, 09:35:43 PM]

by jp52
[November 11, 2022, 12:14:09 PM]

Picture Of The Month



Beer_Run with an early fall Chinook


Wicked Dan (msgdan) at Kayak Fishing Stuff.com made a nifty self-portrait camera mount and I said I was going to cobb together one of these in PVC. Well, I finally found one of those round tuits. Mine is made to fit in the Hobie mast hole, but it could easily be adapted to any rod mount.

The first one I made out of short lengths of 1" pvc, two couplers, an elbow and a tee. The idea was to make it stowable.







I added a 1/4" bolt to one of the end caps to mount the camera, then decided to screw the camera mount from a cheap mini tripod to the cap (made it waay more adjustable) It worked ok, but it had too many parts.



Then, in a momentary lapse into brilliance, it occurred to me to string them together with a bungee. That keeps all the parts together and makes it practically self assembling. So I did, it worked.



http://www.youtube.com/v/TOUKMUEn1ow&hl=en&fs=1"
 
I built another one in 1.25" pvc to make it a bit stiffer and I used the thinner pvc (sch 30?) to minimize weight. I found a small spider tripod and decided to leave it intact. Instead of screwing it to the cap I just shoved into the end of the pipe . Simpler and I can use it elsewhere.  $8 PVC and fittings+$8 mini tripod Total

Comments *

1) Re: Lo-budget Vanity Camera Mount
Written by Water Wolf QCI on April 24, 2009, 08:43:54 PM
Nice :) Looks like its not that tough to get it going :) I like this plan...Thanks FFTW
2) Re: Lo-budget Vanity Camera Mount
Written by bad lattitude on April 25, 2009, 06:37:20 PM
Genius.
3) Re: Lo-budget Vanity Camera Mount
Written by 0 on June 30, 2011, 11:10:53 PM
nice...clean and perfect!
4) Re: Lo-budget Vanity Camera Mount
Written by b0w_bender on February 27, 2021, 01:09:19 PM
I like it!
Commenting option has been turned off for this article.