Lowrance transducer cable pass thru seal options?

Lowrance transducer cable issues. Ok I measures the connector that attaches to the FF and it's 7/8" so I need a pass thru style water tight seal. I looked at the clam style. Rubber corks will work but I am not sure oh it will look. Any opinions?

The Hobie through hull wiring kit work really well.  I also like tension relief fittings.  Just make sure you get one that fits over the plug and use electrical or self vulcanizing tape to build up around the wires.

Hobie through hull wiring kit.  drill a 1 inch hole, then use the kit to match your transducer cable size.

Hobie through hull wiring kit.  drill a 1 inch hole, then use the kit to match your transducer cable size.

http://www.kayakshed.com/hobie-kayak-gear/thru-hull-wiring-kit

This is the same port that is installed on the 2014 Hobie models that have the Lowrance transducer pockets.

Like everyone else mentioned, the hobie one is definitely the best kit.

Thanks everyone. I had not see the hobie one yet.