Welcome, Guest. Please login or register.
December 15, 2025, 04:57:48 AM

Login with username, password and session length

Recent Topics

[December 14, 2025, 06:30:51 PM]

[December 14, 2025, 12:08:42 PM]

[December 13, 2025, 09:52:11 AM]

[December 13, 2025, 06:17:55 AM]

[December 11, 2025, 05:08:20 PM]

[December 10, 2025, 06:32:21 PM]

[December 07, 2025, 03:07:25 PM]

[December 07, 2025, 10:07:13 AM]

[November 29, 2025, 05:43:54 AM]

[November 27, 2025, 07:46:39 PM]

[November 24, 2025, 07:28:35 AM]

[October 31, 2025, 03:49:10 PM]

[October 24, 2025, 06:43:12 PM]

[October 14, 2025, 10:14:18 AM]

by [WR]
[October 12, 2025, 11:41:58 PM]

Picture Of The Month



Guess who's back?
jed with a spring Big Mack

Topic: Interesting Trident Rod Pod idea...  (Read 6214 times)

0 Members and 1 Guest are viewing this topic.

surfanor

  • Lingcod
  • *****
  • Location: Salem
  • Date Registered: Jun 2009
  • Posts: 254
All that money into it and he/she keeps the crappy seat.

I have the same seat and so far my butt seems fine even after 6 hours.  I like the back support. 


There is nothing wrong with the original seat... that is until you sit in a GTS Expedition or Elite lol then you'll never got back it's like a lazyboy for your yak.  The expedition truly help define the term Caddyak for me.
It's never too late to start procrastinating.


troutnut

  • Perch
  • ***
  • Date Registered: May 2009
  • Posts: 57
Found this picture while browsing tonight.

Check out the twist on hatch within the rod pod cover.  I wonder if adding one of these to both ends of the pod, would stiffen it up a bit?  



I got the same idea from a guy down in San Diego. I just modified it a little. I cut the string that keeps the lid attached to the hull, and drilled a hole on the other side and reattached it so I could put the beer bottle holder up front toward the bow. I then put a 5 inch twist off hatch with a clear lid AND a hatchbag underneath. I put my keys, wallet, cellphone and I used to put my camera in there. Between the beer holder and the lid, I bought black plastic 3/8" thick cutting board from Bed, Bath and Beyond, and trimmed it to fit. I then glued it with 3M 5200 and screwed it to the top of the Rod Pod.

Underneath, I glued some 2" thick 7"x12" block of foam I got as packing material for a airconditioner. I hollowed out some grooves for lures and flies. It will float the Rod Pod lid with the bag full. Only thing I lost was the use of the tackle tray that OK provides ( the foam gets in the way). I got a tray from In And Out Burger and it fits perfect in place for baitfishing.

I got some neoprene weatherstripping from the Pickup Cap store ($2 a foot) and hotglued it to the underside of the lid around the perimeter. I hooked up a bungee lid locking system like Howard Mc Kim, but I reattached the buckles and added a buckle at the front also. I can sit my 400 lb butt on the lid without flex, and it never leaks, even when hosing my T15 off afterward.

I can't take any photos right now since some "skum of the earth" thought my camera and cellphone would look better at his crack whores house.

« Last Edit: June 27, 2009, 08:14:44 PM by troutnut »