Pro angler PVC pipe minimum?

Is 44 inchesof PVC  long enough to hold a pro angler for permanent transportation or is that going to be too short?

Is 44 inchesof PVC  long enough to hold a pro angler for permanent transportation or is that going to be too short?

That's about what I have I used a whole saw to cut two debits that rest on top of the roof racks and then just drop the whole thing down and I've never run into any trouble


Sent from my iPhone using Tapatalk

Actually have my PA 12 up there now...


Sent from my iPhone using Tapatalk

I'm using 8 feet on my trailer for my revo13 and it's probably about 2 or 3 feet not than I need

Sent from my Nexus 6 using Tapatalk

What we're looking to do is place two truck bed boxes front/rear on B-Drews trailer and then build a box frame in between that holds the pa just above the boxes on 4inch PVC but will only have roughly 44 inches to work with.

Ok change of plans were going to put the PA on the deck and boxes on top on rails.

Mine is a full 95 inches long, but I built it to fit the racks on my truck - a triple rack that can run my PA 14 down the center, or two side by side.